|
 FIRE
SAFE 108 Wood
FIRE SAFE 108 Wood
is a ready-to-use, water-base intumescent fire retardant wood treatment.
Formulated primarily for use as a Class A fire retardant treatment
for fibrous cellulose material, FIRE SAFE 108 Wood
also provides preservative and anti-bacterial properties.
APPLICATION (read detailed
application instructions prior to use)
The surface to be treated must be dry, free of oil, grease, dust
and dirt. Varnishes and other surface coatings, which seal the surface,
must be removed to let FIRE SAFE 108 Wood to be
absorbed into the wood fibers. A small area should be tested before
complete application of the product.
To achieve a ULC Class A rating, three coats of FIRE SAFE
108 Wood should be applied at a rate of 7.7m2/L. Apply
by brush, spray or dipping processes. The surface should be touch-dry
between applications.
PRECAUTONS
Apply FIRE SAFE 108 Wood in a well-ventilated area.
Mist and vapor concentration should be kept to a minimum and NIOSH
approved mist masks or respirators should be used for heavy mist
conditions. Conventional impervious painter’s gloves and goggles
should be worn.
Use FIRE SAFE 108 Wood to treat:
¨ Vertical and horizontal wood frames and studs
¨ Wooden roof deck and trusses
¨ Unsealed wall paneling
¨ Decorative wood interiors
¨ Wooden stairways and hallways
¨ Base treatment for refinished surfaces
¨ Wooden scaffolding
FIRE SAFE 108 Wood Features:
¨ Highly durable (can withstand over 1000 scrubbing cycles)
¨ Enhances wood luster
¨ Complies with the standard method of testing for surfaces
burning characteristics of building materials, CAN4-S102-M83
¨ Available as a wood stain
¨ Can be enhanced to provide excellent wood preservation and
mildew resistant qualities for specific applications
WARRANTY: The manufacturer
warrants that its products meet the specifications that it sets
for them. The manufacturer makes no other warranties related to
the product. The technical data furnished is true and accurate to
the best of our knowledge, however no guarantee of accuracy is given
or implied. We assume no responsibility for coverage, performance
or injuries resulting from use. Maximum liability, if any is limited
to replacement of products. Technical data are subject to change
without prior notice
Read and observe all recommended safety and handling procedures
when using this product.
FIRE SAFE 701 Fabric
FIRE SAFE 701 Fabric
is a high quality, ready-to-use, water-soluble fire retardant treatment
for natural and synthetic fabrics. FIRE SAFE 701 Fabric
forms a continuous glass-like layer over each treated fiber when
applied. It intumesces in the presence of heat to create a charred
insulating layer consisting of noncombustible carbon with nitrogen
and carbon dioxide within its structure thus preventing oxygen from
reaching the fuel source.
APPLICATION (Read detailed
application instructions prior to use)
The fabric to be treated must be free of oil, grease, dust and dirt.
Always test for compatibility and colorfastness prior to full-scale
application of the product.
FIRE SAFE 701 Fabric is applied
by dipping or spraying the fabric. The application rate will depend
upon the type and weight of fabric treated. The desired add-on (amount
of fire retardant left on the fabric after application and drying)
is generally as follows:
Wool 8-12%
Cotton 10-15%
Rayon 12-17%
Poly Cotton 15-20%
Acrylics 15-20%
Dipping Process: After fabric
has been dipped in FIRE SAFE 701 Fabric squeeze
out any excess solution and allow the material to dry completely
before it is folded or rolled.
Spraying Process: Fabric should
be sprayed on both sides to the point of saturation and then allowed
to dry completely before being rolled or folded. Wearing water-resistant
gloves and goggles for handling.
FIRE SAFE 701 Fabric Features:
¨ Withstands five dry cleaning cycles (Note: Fabrics treated
with FIRE SAFE 701 Fabric will lose their fire
retardant qualities after washing or laundering in water.)
¨ Clear, colorless liquid
¨ Odorless
¨ Most fabrics will retain original hand and feel after treatment
¨ Complies with the standard for flame tests of flame-resistant
fabrics and films, ULC S109-M1980- and CAN2-4.2-M77, Method 27.1
WARRANTY: The manufacturer warrants that its products meet
the specifications that it sets for them. The manufacturer makes
no other warranties related to the product. The technical data furnished
is true and accurate to the best of our knowledge, however no guarantee
of accuracy is given or implied. We assume no responsibility for
coverage, performance or injuries resulting from use. Maximum liability,
if any is limited to replacement of products. Technical data are
subject to change without prior notice
Read and observe all recommended safety and handling procedures
when using this product.
|
